Site Search

Gumball Machine Parts

Gumball Machine Globe Parts

Looking for a globe for your gumball machine? We carry replacement globes for every major brand including hard to find glass globes. This the most common requested replacement item on bulk vending machines. They hold the vending product while displaying it to the customer. Replacing your old, hazy and scratched vending machine globe will improve gum and candy sales greatly by improving the appearance of your machine and its product. Replacement is a simple and easy process as most are attached with two long threaded rods. Most new vending machine globes are made out of high strength polymer plastic and resist breaking and cracking, making them safer to use than glass. We do have a few good used glass globes available for those people wanting to restore their old gumball machine as original as possible. Be sure to use a gasket on both the top and bottom of glass globes when replacing them. These rubber gaskets protect the glass edges from chips and breaks caused by direct contact with metal surfaces. Call us for bulk pricing on case lot quantities of 12 or more.

Glass globe gasket for all bulk vending machines with 5 1/4" diameter globe openings, including Northwestern, Oak and others. These rubber gaskets are used on both top and bottom of glass globes for protect edges from chips and cracking.

The Northwestern 33 Glass Globe is 7 1/2" high, 5 1/2" diameter. Also known as the 3 1/2 lb. globe.

The Northwestern 49 Glass Globe is 7" high, 6" square.

The Northwestern Model 60 Glass Globe is 8" high, 6 3/8" square.

Clear PVC plastic square globe for Northwestern Model 60, A&A PN95,PO89 & PM Elite vendors. 6 3/4" square globe with 5 3/8" diameter round openings on top and bottom. This globe uses two globe gaskets and two globe rods sold below.

Clear plastic large capacity globe for Northwestern Model Super 60, A&A PN95 & PM Elite vendors. 7 5/8" square opening on top and 5 3/8" diameter round opening at the bottom.

The Oak Acorn Glass Globe is 6 1/8" high, 6" square. This globe holds 6 lbs of merchandise.

The Oak Acorn Plastic Globe is 8" high, 8" diameter. This globe holds 11 lbs of merchandise. Used on current Oak Acorn and Vista Globe models.

The Oak Acorn Glass Globe is 8" high, 7 1/2" diameter. This globe holds 11 lbs of merchandise. Old original glass globe.

Clear plastic square globe for Oak series 300 vendors and A&A PO300 vendors. 6 1/2" x 6 1/2" square top opening and 5 1/4" diameter round bottom opening.

Clear plastic large capacity globe for Oak series 450 vendors and A&A PO450 vendors. 7 3/4" x 7 3/4" round cornered top opening and 5 1/4" diameter round botton opening.

Clear plexi panel for Oak Vista and A & A PO89 small head and PM Supreme vendors. 9 1/8" x 5 1/2" x 3/16" thick panels slide into place. Shown with protective blue film still attached.

Clear plexi panel for A&A PO89 large head, PN95 and PM Elite vendors. 8 7/8" x 5 7/8" x 1/8" thick panels slide into place. Shown with protective film still attached.

Clear plastic two piece 11 pound globe for most imported vendors. Includes the lower globe section also. Direct replacement for most imported vendors.